1. Multimeters: It measures a variety of electrical properties. Multimeters are typically used to measure voltage, resistance, and current, in which case they are also known as volt-ohm-milliammeters, as they include wattmeters, ampmeters, and ohmmeters. Some measurement systems include measurements of additional properties, such as temperature and volume. The purpose of this testing method is to ensure DWTEK's subsea connectors are stable and of high quality for multiple applications.
2. DWTEK’s connectors all have been through the process. This is used to measure the insulation's resistance. This technique uses a comparison principle, where the resistance of the insulation is compared with the known value of resistance. As the insulation resistance rises, the moving coil's pointer goes towards infinity, while as it falls, it indicates zero resistance.
3. Tested by pressure chambers: stimulate Max. ocean depth of 6,000m and Max. temperature from -20°C to +80°C
Material Specification | |
---|---|
Connector body | Chloroprene rubber |
Location pin | Contact 2: Stainless steel 316 |
Contact 3,4,5,6,7,8: N/A |
**Mobile device:
Please scroll horizontally to read more information in the table
Low Profile Micro Dummy (LPMCDC) Male Contact 2,3,4,5,6,7,8 | |
---|---|
Male (Order No.) | Contact |
LPMCDC02M | 2 |
LPMCDC03M | 3 |
LPMCDC04M | 4 |
LPMCDC05M |
5 |
LPMCDC06M |
6 |
LPMCDC07M |
7 |
LPMCDC08M |
8 |
Low Profile Micro Dummy (LPMCDC) Female Contact 2,3,4,5,6,7,8 | |
---|---|
Female (Order No.) | Contact |
LPMCDC02F | 2 |
LPMCDC03F | 3 |
LPMCDC04F | 4 |
LPMCDC05F |
5 |
LPMCDC06F |
6 |
LPMCDC07F |
7 |
LPMCDC08F |
8 |