Low Profile Micro Overmold (LPMCOM)

Contact 2,3,4,5,6


  • Contact Face Material: Made of durable rubber
  • Connector Body Options: Available in either rubber or metal
  • Underwater Operation: Can be safely plugged in and unplugged underwater when the power is turned off
  • Cable assembly service available
  • Feel free to contact us if you require STEP files

Low Profile Micro Overmold

Application

  • Underwater camera and lights (video system)
  • Diver communications
  • ROV systems
  • Submersibles
  • Towed-array cable systems
  • Current meters
  • Animal migration research


In-house Testing Facility 1: Multimeters

1. Multimeters: It measures a variety of electrical properties. Multimeters are typically used to measure voltage, resistance, and current, in which case they are also known as volt-ohm-milliammeters, as they include wattmeters, ampmeters, and ohmmeters. Some measurement systems include measurements of additional properties, such as temperature and volume. The purpose of this testing method is to ensure DWTEK's subsea connectors are stable and of high quality for multiple applications.


In-house Testing Facility 2: Megger

2. DWTEK’s connectors all have been through the process. This is used to measure the insulation's resistance. This technique uses a comparison principle, where the resistance of the insulation is compared with the known value of resistance. As the insulation resistance rises, the moving coil's pointer goes towards infinity, while as it falls, it indicates zero resistance. 


In-house Testing Facility 3: Pressure Chambers

3. Tested by pressure chambers: stimulate Max. ocean depth of 6,000m and Max. temperature from -20°C to +80°C

Low Profile Micro Overmold (LPMCOM)
Operation and Material Spec.

Operation Specification
Max. voltage  300 V DC
Current rating @contact 5A
Max. current @connector 20A
Insulation resistance  > 200 Mohm 
Contact resistance < 0.01 ohm
Depth rating  600 bar
Temperature rating  - 40 to 60˚C

Material Specification
Connector body  Chloroprene rubber
Bulkhead body  Brass (BR)
Contact  Gold plated brass 
Socket  Gold plated Beryllium copper
Location pin  Contact 2: Stainless steel 316
Contact 3,4,5,6,7,8: N/A
OM leads  AWG 20 PTFE, 10cm

Low Profile Micro Overmold (LPMCOM)
Contact 2,3,4,5,6

**Mobile device:
Please scroll horizontally to read more information in the table

Low Profile Micro Overmold (LPMCOM) Male Contact 2,3,4,5,6
Male (Order No.) Contact
LPMCOM02M 2
LPMCOM03M 3
LPMCOM04M 4
LPMCOM05M
5
LPMCOM06M
6

Low Profile Micro Overmold (LPMCOM) Female Contact 2,3,4,5,6
Female (Order No.) Contact
LPMCOM02F 2
LPMCOM03F 3
LPMCOM04F 4
LPMCOM05F
5
LPMCOM06F
6

**All product descriptions and specifications are subject to be changed without notice