1. Multimeters: It measures a variety of electrical properties. Multimeters are typically used to measure voltage, resistance, and current, in which case they are also known as volt-ohm-milliammeters, as they include wattmeters, ampmeters, and ohmmeters. Some measurement systems include measurements of additional properties, such as temperature and volume. The purpose of this testing method is to ensure DWTEK's subsea connectors are stable and of high quality for multiple applications.
2. DWTEK’s connectors all have been through the process. This is used to measure the insulation's resistance. This technique uses a comparison principle, where the resistance of the insulation is compared with the known value of resistance. As the insulation resistance rises, the moving coil's pointer goes towards infinity, while as it falls, it indicates zero resistance.
3. Tested by pressure chambers: stimulate Max. ocean depth of 6,000m and Max. temperature from -20°C to +80°C
Operation Specification | |
---|---|
Max. voltage | 600 V DC |
Current rating @contact | 3 POWER CONTACTS 10A / 22 SIGNAL CONTACTS 5A |
Max. current @connector | 60A |
Insulation resistance | > 200 Mohm |
Contact resistance | < 0.01 ohm |
Depth rating | 600 bar |
Temperature rating | - 40 to 60˚C |
Material Specification | |
---|---|
Connector body | Chloroprene rubber |
PBOF body | Stainless 316 |
Contact | Gold plated brass |
Socket | Gold plated beryllium copper |
Bulkhead leads | 3 x 18 AWG PTFE , 30cm / 22 X 20 AWG PTFE , 30cm |
**Mobile device:
Please scroll horizontally to read more information in the table
Standard Circular PBOF Male Contact 25 | |
---|---|
Male (Order No.) | Contact |
SCPBOF25M | 25 |
Standard Circular PBOF Female Contact 25 | |
---|---|
Female (Order No.) | Contact |
SCPBOF25F | 25 |
**All product descriptions and specifications are subject to change without notice.